Pokemon on the Go - Space Edition

Prints (0)

Description

Based on the Pokemon on the GO board game(for 1 or 2 players) (https://pinshape.com/items/260...) I created previously. 

In this new design I changed the board size and added interior spaces on the board to accommodate M3 washers, this combined with the space on the meeples for 4x1mm magnets allows for the pieces to stick to the board, making it ideal for a travel set of the game and for playing in space.

To correctly print the board, you will need to pause the print at least once ( or two if you want a two color board as I did), this pause should be made immediately before the holes for the M3 washers begin to be covered, during the pause simply place m3 washers in all the holes and then press continue, these will get covered the the plastic and become an integral part of the design. For the meeples you will require 4x1mm magnets, simply slide them into the spaces on their bases, it should be a tight fit thus not requiring any glue.

Design Files

File Size

9.stl
65.9 KB
6.stl
53.6 KB
5.stl
39.8 KB
2.stl
96.2 KB
board.stl
1.91 MB
33.stl
50.7 KB
32.stl
78.6 KB
28.stl
68.3 KB
27.stl
80.7 KB
22.stl
94.1 KB
21.stl
57 KB
10.stl
65 KB
12.stl
75.2 KB
13.stl
58.4 KB
14.stl
62 KB
15.stl
58.5 KB
16.stl
66 KB
17.stl
71.9 KB
18.stl
60.9 KB
19.stl
41.7 KB
20.stl
63.9 KB
23.stl
81.4 KB
24.stl
294 KB
25.stl
608 KB
26.stl
64.7 KB
29.stl
49.2 KB
30.stl
91.1 KB
31.stl
58.3 KB
trainer.stl
82.5 KB
1.stl
83.6 KB
3.stl
53.3 KB
4.stl
98.2 KB
7.stl
66.7 KB
8.stl
52.4 KB
11.stl
46.3 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×