Prints (0)


Summary Millenium Falcon STL files with Pilot Cockpit Millennium Falcon STL files | Standard Kit you can find here:

The 3D printed Millennium Falcon standard kit, consists of the top and bottom hulls only, and is 717.5mm wide, 1000mm deep and 244.46mm tall or 28.228in wide, 39.370in deep and 9.606in tall. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Yes Supports: Yes Resolution: 0.1 Infill: 20% Notes: Speed setups: Infill speed: 50mm/s Outer shell speed: 30mm/s Inner shell speed: 20mm/s Top/Bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill Pattern: Grid Line Distance: 3mm Infill Overlap: 20% Infill Layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle - 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: Check Pattern: Lines Line distance: 1.5mm Platform Adhesion: Type: Brim Brim Line Count: 7 (up to 20, depending on the model’s height)

Design Files

File Size

825 KB
1.34 MB
1.12 MB
1.31 MB
457 KB
333 KB
334 KB
799 KB


Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now