Designed by
Otto_Beilman
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary These should work well with 15mm or 18mm figures. Of course, they can be scaled to whatever you need. Moonbase: Print 2 hinges and 1 of everything else. Hinge should be glued to each wing. Use 1.75mm filament as a hinge pin. Saucer Print 4 legs and 1 of everything else. This moonbase is my design. Saucer is not my design. I cut it up for 3d printing and provided it here for the Thingiverse community. Credit goes to Bart Vansteenkiste https://grabcad.com/library/flying-saucer-4 I have added leds to this saucer and it looks fantastic. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX
Design Files
File Size
Saucer_hull_upper.STL
2.12 MB
moonbase_right_wing.STL
75.1 KB
moonbase_left_wing.STL
74.9 KB
Saucer_leg.STL
42.6 KB
Saucer_hull_lower.STL
353 KB
moonbase_left_door.STL
35.9 KB
moonbase_door_hinge.STL
7.89 KB
moonbase_dome.STL
546 KB
moonbase_with_saucer.STL
5.46 MB
moonbase_right_door.STL
35.9 KB
Moonbase_Saucer.STL
5.46 MB
Comments