Ni No Kuni - The Locket

This design of the Locket from Ni No Kuni is hollow and can be closed with a twist lock. There are also models for three of the heart pieces, so you can print yourself a Locket full of enthusiasm!

For the simple version print:

• the_locket_unicolor_body.stl
• the_locket_unicolor_heart.stl

For the assembly version use different colors or materials:

• the_locket_golden_heart_flat.stl
• the_locket_golden_ring.stl
• 2x the_locket_green_heart_half_solid.stl or 2x the_locket_green_heart_half_thin.stl (for more transparency)
• the_locket_green_top.stl
• the_locket_green_bottom.stl

Size

ca. 8cm x 5cm x 5cm

Print Settings

Use 80%-100% infill for all parts except for the the_locket_unicolor_heart.stl, that part can be printed with just 15-20%It can be printed without support Print slow and with small layer height (0.1mm) to achieve good detail and surface finish, especially if you do not want to post process the parts

Let me know if you have any questions.