Prints (0)

Description

This straddle clamp is meant to mark 3 sides of a piece of lumber for various cutting.  One edge is at a 90° angle and the opposing side is at a 45° for miters.  The jaw depth is 3" and the throat opens up to 4" to fit standard 2x4's and 4x4's.  

Print Settings:

30-50% infill, .25mm layers, supports only needed for the moving side.

Orient the moving side with the cylinders against the hotplate so the threads (3/8-16) come out properly.

Design Files

File Size

fixed side.STL
27.5 KB
knob.STL
271 KB
Moving Side.STL
331 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×