Summary This mash-up was made as a b-day gift for my freind who really loves "The Tao of Pooh" http://en.wikipedia.org/wiki/The_Tao_of_Pooh It was a big hit. UPDATE - I noticed the bottom is not flat, so I have uploaded a new STL with a flat bottom, this makes adding a message to the underside easier. I like the idea of adding a message to the base, I used this quote from the book "A clever mind is not a heart." and this is on the file called "poohdda+heart-mind saying.stl" adding text was not too bad using blender to extrude the text and tinkercad.com to make the text a hole and put it on the base. also to help educate your friends and family, best I have found under 2 minute slightly amusing, simple & straight forward explanation of home 3D printing, (made by and for schools): http://www.youtube.com/watch?v=YpHv19jdloI Instructions the picts are of this printed on ultimaker, 0.4mm nozzel, in PLA, 0.2mm layer hieght, and 0.8mm walls. I got some gaps especially on pooh's head..which seems to be the most troubling spot, SO I have also unploaded my pooh-crown-4-testing.stl file. make sure you have your settings so this part comes out good before you print the whole thing. next time i will go with 0.1mm layer height and 1.2mm walls, also see pic.