Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary This is a EL Wire Photo Frame. Ideal for keep the best moments with friends during Halloween. Print Settings Printer: BQ Witbox Rafts: No Supports: No Resolution: 0,2 Infill: 20% Post-Printing Clear the holes Use a rasp to clear the holes of the front part of the photo frame. How I Designed This STEP 1 - The back part of photo frame I used Openscad do design this part. This is made for a standard picture of 15x10 STEP 2 - The front part of photo frame I search some images on internet and with inkscape i turn them into .dxf file and use it on openscad. STEP 3 - The support for the photo frame This is a simple support frame Assembly STEP 1 - Materials You will need: Photo frame printed stl files 1m EL Wire with inverter Rasp A photo STEP 2 - Install the EL Wire Pass the EL Wire through the hole and put it around the frame STEP 3 - Install the support Fit the support in the back part of the photo frame STEP 4 - Add the photo Choose a photo STEP 5 - Fit the front part of the photo frame Don't forget to use the rasp if needed! STEP 6 - Turn on the EL Wire Turn the EL Wire on and then turn off the lights Now your photo disappears in the void... References All about EL Wire This a excellent pdf made by Lady Ada https://cdn-learn.adafruit.com/downloads/pdf/el-wire.pdf Use inkscape A little tutorial how to use inkscape to vectorize images https://inkscape.org/en/doc/tracing/tutorial-tracing.html
Comments