Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Pay a few bucks here for the entire design or get it for free with registration at https://timeportalgames.com/wp/ . I have also uploaded the entire expansion set under my designs. This is a 3d print/ laser cut mash up. It is a 28mm fort/castle. It is totally component based allowing you to make a structure of any scale and dimension in regards to exterior contour. The fort pictured is only a proof-of-concept build and is not ment to amaze anyone. The total potential of this design is huge compared to what I am showing here. This release is open source, origionally released in feb, 2016. This is my first full release on a 3rd party site.
3d printable parts to replace laser cut parts also posted on this site here
youtube preview here
laser cut info
You can use any texture you want for laser cutting.Floors and catwalk are laser cut in one pass using 1/8th inch baltic birch ply . BMP images are raster engraved twice. Once with a half tone dither and once with no dither and a b/w threshold of 90 or so. Walls are laser engraved XLPE foam. It is laser engraved with a 40w laser at 100% speed and 75% power using a simple dither @250 DPI. It is important not to increase resolution higher as that actually doubles the cutting power of the laser.
Comments