Pi Zero Face Case

Prints (0)


Summary Case for your Raspberry Pi Zero. This case requires no hardware and snap fits shut. The HDMI and USB are accessible with case on. Two different top covers available, one with access to the GPIO pins and can have a pHat attached, or one with teeth. I am also including the Autodesk Fusion 360 Files so you can change the designs on the top and bottom case if you want. http://a360.co/22ZLPZB - Face case with teeth http://a360.co/22ZLYMy - Face case with GPIO access http://a360.co/21eHW3u - Case with no designs for customization The Pi Zero used in the design came from here - https://grabcad.com/library/ra... Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: No Resolution: 200 Micron Infill: zero Notes: I printed this one with a 0.4mm nozzle with layer width of 0.4mm Each half took about 30minutes to print for me and used around 9grams of filament How I Designed This

Design Files

File Size

516 KB
469 KB
102 KB
469 KB


Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now