Summary This is a RunCam2 camera mount for the QAV210 frame. It has a few overhangs, but prints okay if you print it with the lens protector down. There are four versions, each with a different angle - 25, 30, 35, and 40 degrees. While the camera hangs out over the front of the frame, your FPS camera should not see it in the view as long as the angle is greater than or equal to the mount. The photos were from a test print that didn't match the curve in the front of the frame perfectly, but the rest worked very well. The uploaded STL's are correct. It was printed in ABS.