Prints (1)


Summary Back after short RL Hiatus, I finished this late last month 52 mm Minotaur stands about 70mm. Lightly Inspired by KOBL Minotaur. I highly suggest HIPS printing for my figures on FFF machines however this fella should be large enough to manage without. I also suggest dialing down the speed for HIPS printing, see below This model is designed for HIPS printing. 28mm model versions available through or buy at ASSEMBLY REQUIRED:Will likely require xacto blade, or sanding, and superglue to assemble weapons/shields to figure. We advise the following settings for slicing Layer height: Between .2mm auto_support: Between 1- 1.5mm or 40-50% HIPS fill Fill Density: 15% or greater 3 shells Print speed 30 outlines 75 fill Other notes glass plate with HIPS slurry allows for plate to heat only to 100c without issue. Many free designs available at Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator Rafts: Yes Supports: Yes Resolution: 350000 poly Infill: 15% Notes: Dissolvable filament print. Post-Printing Acetone brushed flesh areas, acrylic paint

Design Files

File Size

16.8 MB


Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now