Designed by
samuel_oesterle
![Masson jar lamp by Samuel Bernier, Project RE_ 3D Print 102722 Masson jar lamp by Samuel Bernier, Project RE_ 3D Print 102722](http://assets.pinshape.com/uploads/image/file/102722/container_masson-jar-lamp-by-samuel-bernier-project-re_-3d-printing-102722.jpg)
![Masson jar lamp by Samuel Bernier, Project RE_ 3D Print 102723 Masson jar lamp by Samuel Bernier, Project RE_ 3D Print 102723](http://assets.pinshape.com/uploads/image/file/102723/container_masson-jar-lamp-by-samuel-bernier-project-re_-3d-printing-102723.jpg)
![Masson jar lamp by Samuel Bernier, Project RE_ 3D Print 102724 Masson jar lamp by Samuel Bernier, Project RE_ 3D Print 102724](http://assets.pinshape.com/uploads/image/file/102724/container_masson-jar-lamp-by-samuel-bernier-project-re_-3d-printing-102724.jpg)
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary An other cool way to reuse a Masson jar using an IKEA suspension kit and funky 3D printing. More about Project RE_ on http://www.instructables.com/id/Project-RE-by-Samuel-Bernier/ Instructions All you will need is a 3 inches wide glass jar (lid size), the 6$ IKEA suspension kit, a light bulb and this file. Print the shade, the bigger opening facing the table. Set the support angle to 30 degrees. The part takes about 3 hours to print in normal mode. 0.25 thickness. Then pass the cable trough the hole, screw the light bulb and then screw the cleaned jar. You got the lamp! -Sam
Design Files
File Size
lampe_ovales.STL
8.87 MB
Comments