RX122 Atom V1 600TVL Camera Mounts

โ—€
โ–ถ

Prints (0)

Description

SummaryMounts for this camera from BangGood. These are various mounts that I generated over time and the length at the end of the file name indicate how high the print is. Measure the distance between your top and bottom plate to choose which height and angle of file you want. A perfect print will allow the M2 screws from the kit to thread into the top and bottom holes. If your printer has trouble with small holes (like mine) you will need to drill out the holes before inserting the screws. Be careful not to break a bit! (PLA is tough to drill) I've also included my Buzzer Clip print that allows the buzzer to sit neatly behind the camera secured with a M5 5-to-6mm screw.Print SettingsRafts: NoSupports: NoResolution: 0.3Infill: 100%

Design Files

File Size

25deg_12mmCam_23mm.stl
107 KB
25deg_12mmCam_23_5mm.stl
107 KB
25deg_12mmCam_24mm.stl
107 KB
20deg_12mmCam_24mm.stl
73.3 KB
20deg_12mmCam_23mm.stl
73.3 KB
30deg_12mmCam_23mm.stl
119 KB
Buzzer_Clip_3.stl
22.3 KB
20deg_12mmCam_23_5mm.stl
73.3 KB
30deg_12mmCam_23_5mm.stl
119 KB
30deg_12mmCam_24mm.stl
119 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×