Designed by
AaronH15241
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
This is a model of the Falk V-Class 157 size Horizontal Parallel Shaft Reducer. The model from Falk didn't have shafts or gears, so I generated them myself. It's roughly a 1:12 ratio. Most parts are 6 times too big. Scale everything EXCEPT THE WASHERS down by 1:6 (16.66%). Most parts will need to be rotated. The two oval cover plates are off by 2°
Supports are required for some parts.
Design Files
File Size
Maker Mid Gear 2.stl
507 KB
Large Bearing Retainer.stl
770 KB
Large Shaft.stl
64.6 KB
Large Thick Washer.stl
37 KB
Large Thin Washer.stl
37 KB
Maker Large Gear.stl
1.73 MB
Med Thin Washer.stl
36 KB
Maker Mid Gear 1.stl
2.16 MB
Pin.stl
209 KB
Maker Small Gear.stl
547 KB
Med Bearing Retainer.stl
421 KB
Med Thick Washer.stl
36 KB
Mount Plate 1.stl
196 KB
Small Thick Washer.stl
35.4 KB
Mount Plate.stl
196 KB
Small Shaft.stl
38.9 KB
Small Bearing Retainer.stl
616 KB
Tag.stl
134 KB
Case Bottom.stl
890 KB
Small Thin Washer.stl
35.4 KB
Case Top.stl
1.16 MB
Cover Plate Bottom.stl
205 KB
Cover Plate Front.stl
181 KB
Cover Plate Top.stl
205 KB
Stub Mid Shaft.stl
51.3 KB
Comments