Comet 150 Micro Quad

SummaryThis is the Comet 150 Micro Quad Copter. It is designed around 3" props and 1306 motors, and is intended to use common multirotor electronics and fpv gear. Suggested setup: Flight Controller: Naze32, CC3D, MotoLabs Tornado, etc. (30.5x30.5mm mounting) Power Distribution Board: Matek PDB, ATAS Sphere PDB, etc. ESCs: Little Bee 20A, DYS XM20, etc (BLHeli) Motors: 1306 sized, 3100kv-4100kv Battery: 450-850mAh 3S or 4S VTX: Hawkeye or UBAD 200mW with SMA extension FPV Cam: 28x28mm 600TVL Board Cam Hardware: M3x8mm self tapping (for attaching Canopy), M2.2x6mm self tapping (for attaching FPV Cam to Canopy), Nylon M3 screw/nuts/standoffs (for FC/PDB stack)Print SettingsPrinter Brand: PrintrbotPrinter: Simple BlackRafts: NoSupports: YesResolution: .2Infill: 30%Comet 150 Maiden Flight