Acrylic Doors for Flashforge Creator X (or similar Replicator2 C

SummaryThese are a nice set of matching acrylic doors for the Flashforge Creator X style Replicator clones. The doors consist of a left and right side (mirrored), with four low profile 3D printed hinges and a 3D printed latch that holds both doors securely closed. Uses only one latch for both doors. Holds the doors securely closed, and flush with the frame. Doors are part of a project to enclose our Flashforge Creators to improve print quality. Enclosure includes a snap together Acrylic top, doors, hinges and latch. We have the kit available at: http://drazzticaction.com/products-page-2/3dprinters/enclosure-for-makerbot-replicator-2-2x-3d-printers-and-similar-clones/ Includes the front door panels, snap together top hood, made from 3mm Acrylic, hinges and hardware to attach the doors.InstructionsDoors can be laserjet cut or routed out of 3mm Acrylic. Print four hinges (two per door), and one latch. Attach hinges to the door with 10mm M3 bolts/nuts, and use the stress relieving printed washers. (http://www.thingiverse.com/thing:755320). With the hinges in place the doors are easy to align for drilling the mounting holes on the printer. Drill the holes and mount on the printer using 16mm M3 bolts/nuts and washers. Enjoy better printing in ABS.