Fabrikator Closed Chamber upgrade

SummaryAim was to upgrade fabrikator to a closed chamber, to have a constant t° for printing. This is lessimportant for PLA, but is important for ABS, Polycabronate. Also it has reduce the noice a lot. It's still possible to access from the top easly You need to drill your slef the holes, and trace it (easy) What's needed: Plexiglass 4mm: Left part: 20 x 24 cm Right Part: 20 x 24 cm (do not insert screw in top right, ot od not block stepper motor) Top: 24.5 x 5 cm (Two times) 21 x 5 cm (Two times) 24.3 x 21.8 (drill in center 6mm) Front door: 26 x 22.5 cm 26 x 4 cm I used 7x M3 nylon + bolts for the sides 16x 2,9mm x 9.5 mm metal screw Print following parts: 1x door lock 2x charnière 4x coin 4x supportcote 2x Support_90_long 2x Support_90_court See pictures for assembly Usage: for pla i keep t° inside arround 31°C, 1 Layer 63°C Other 40°C Door open 2cm.