Designed by
luc.e
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
SummaryWanted a RasPi 2 (Octopi) housing same style as the Original housing for the Rambo mini. Best is to use support (not to fine so plus 1mm) for the holes. Use M3 screws to screw it together and mount on the frame. Printed in ABS orange standard ABS settings.Print SettingsPrinter: Prusa i3 PlusRafts: NoSupports: YesResolution: 200 umInfill: 20%Notes: If you want to speed up the printing you can edit the STL and make the walls 1mm instead of 2mm. Using 2mm creates a solid box.
Design Files
File Size
prusa_i3_plus_raspi_2_housing_left.stl
16.1 KB
prusa_i3_plus_raspi_2_housing_right.stl
38.6 KB
prusa_i3_plus_raspi_2_housing_back.stl
19.4 KB
Comments