E3D Krakken Prusa i3 carriage with Fan, LED and Z-Stop bed level

SummaryI bought a E3D Krakken print head so I could do 4 color printing. The print head is real nice but it required a carriage for my Prusa i3. So I designed this in Sketchup Pro. I decided to include some features like - the bearing blocks and the main printhead mount are adjustable in case your Prusa's X-rails are slightly further/closer than mine are. There are loops and a zip tie hole set on either side to hold the excess wires. The Fan/LED/Z-stop bed leveler is also adjustable up/down a little so you can get it fitted slightly above the print head tips. The fan ducting only blows out in a downward direction to prevent it from blowing onto the print tips. I tried to balance the weight as best I could so it would not be too heavy toward the front, I also tried to make it as narrow as I could to give myself as much X distance possible. Once I get the printer completed and test printing I will know if anything needs tweaking but I think it is good to go as is. CoogInstructionsMain thing you need to watch for is the placement of each heater block and how they are oriented. The heating elements and the temp probes should all be mounted and wired prior to mounting the Krakken into the printer mount itself.