(updated)wanhao duplicator i3 adjustable feet

Prints (0)

Description

Summaryi just added a foot for an actual o-ring (size =11/16"x 7/16"x 1/8") im using this one now and it works realy nice.the o-ring holds in nice and tight but also gives you plenty meat under the foot for cushion. added v4 as a request . also used and scaled down this item http://www.thingiverse.com/thing:31986 for the foot. added a v3 with a ninjaflex bubble for vibration. added a oring style cutout foot v2. i added a ninjaflex cutout foot as requested. i decided to create adjustable feet for the duplicator i3 to get rid of the rocking motion mine gets while sitting on my desk. and also i have read that other people had wanted adjustable feet to level off there printers. it just slips on the frame so you can place them where ever you want and have as many as you want to level off your machine im printing up 6 pairs right now and will post pictures when finnished.Instructionsbrace and foot printed in pla 2 shells 0.2mm layer height 60 infill. the caps and orings for the feet print in ninjaflex.. i dont do ninjaflex yet but some asked for models. pleases let me know if everything works.

Design Files

File Size

ninjaflex_foot_v3_bubble.stl
3.53 MB
11-16x7-16x1-8_inch_oring_foot.stl
13 MB
Di3_adjustable_feet_bracket.stl
4.81 MB
ninjaflex_foot_v4_cap.stl
714 KB
ninjaflex_foot_v4.stl
10.9 MB
ninjaflex_foot_v2.stl
12.8 MB
ninjaflex_foot_mod_.stl
11 MB
Di3_adjustable_feet.stl
10.8 MB
oring_for_ninjaflex_foot_mod.stl
266 KB
ninjaflex_foot_v3.stl
11.6 MB
ninjaflex_foot_v2_adjusted_0.20mm.stl
12.7 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×