Prints (1)

Description

SummaryI like to create jointed figures. You can see my creations here: http://www.soniaverdu.es/p/bjd-art-doll.html I want to share this posable robot figurine with you. It features ball joints and some hinge-like joints. An elastic cord is used to secure the limbs and allow for positioning - no screws required! I hope you enjoy." Here you can see how it moves: https://www.youtube.com/watch?v=bH3-T-4muZQ&feature=youtu.beInstructionsI recommend printing oh highest quality for good fitment. No need material support should be needed. Video on assembling the robot figurine with elastic cord: https://www.youtube.com/watch?v=-oG39NoSJGM&feature=youtu.be" The elastic cord that best fits the robot is 3mm in diameter. In the video I use elastic cord 3mm diameter in neck/head and arms and legs thinner one, but the robot works best if you place one of 3mm in diameter and quite tight knots Layer height(mm): 0.1 botton/top, Shell thickness(mm): 1.2 It is important for delicate parts of the neck, arms and hands Fill density%: 20 Print speed(mm/s): 40 Support : none , but if you have trouble, you can choose "platform adhesion " I've printed pla 210º (c) Note: Be careful with the joint at the base of the neck and fingers, they often remain stuck in printing, and is difficult to get moving the joint

Design Files

File Size

mano_right_hand.stl
2.14 MB
_bota_right_boot.stl
462 KB
cadera_hip2.stl
4.75 MB
pecho_y_cuello_neck_chest2.stl
3.7 MB
brazo_right_arm2.stl
1.24 MB
left_ball_hip2.stl
680 KB
mano_left_hand_2.stl
2.14 MB
brazo_left_arm2.stl
1.24 MB
BOTA_left_boot2.stl
459 KB
muslo_left_thigh_2_.stl
452 KB
richt_ball_hip2.stl
680 KB
rodilla_right_knee3.stl
423 KB
rodilla_left_knee3.stl
423 KB
Cabeza_HEAD2.stl
2.25 MB
muslo_right_thigh_.stl
452 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×