No Prints Yet
Be the first to upload a Print for this Design!
Summary This is the first 20 tiles that I created to make Tudor Buildings for my Tudor village that is 00 scale ( 4mm to the foot, 1:76.2) model railways. Can be also used for HO scale, British themed but could be used elsewhere. The cover photo is of several buildings that are made using these tiles, as mentioned in other things I will upload all the printed parts to make these buildings, plus I will put together some pictures to make some other buildings I have already built. But it is best to use your own imagination to come up with your own designs. The SCALEPRINT TUDOR BUILDING SMALL TAVERN http://www.thingiverse.com/thing:1116335 Is an example of what can be made from these tiles there are about 100 tiles in the set so far I will upload in lots of 20 tiles. I have divided plastic containers that contain my tiles and I just pick them out and glue them together in the design I want, It's a bit like Lego. The building shown as the cover for the SCALEPRINT VICTORIAN STYLE BARGE-BOARDS 45 DEGREE http://www.thingiverse.com/thing:1114505 Was also made from these tiles. If you have any questions about anything I have uploaded please ask questions. If you have a request for something I shall see what I can do, no promises though on that one. Print Settings Rafts: Doesn't MatterSupports: Doesn't Matter Notes: With the Tudor tiles the largest nozzle i would recommend is a 0.4 I personally use a 0.2mm nozzle for my printing of these Tudor Tiles but have printed them with a 0.4 nozzle on my other printer. The window frame insert with TT-519 I would recommend using supports I print these using a 0.2mm nozzle I have not tried with a larger nozzle