V1 RC CAR JLB CHEETAH DIY EDITION PREMIUM

BUILD GUIDE :

https://docs.google.com/presentation/d/1jabhHdwHruR_a4ibou3fMm3Z3C0JivmusydT-Vo3oH4/edit?usp=sharing

NEEDS :

• TPU ( 500g ) 

• Arms

• Bumpers

• PLA Plus (  1Kg ) 

• All the Rest

• TOOLS

• Hallen H2.5mm(for M3 Screws) / H1.5(for Pinion)

• Long Nose Pliers

• ThreadLocker

• Grease

• Clamp Gaskets

• HARDWARE STORE

• Rolling 6800ZZ   ( X 8)

• Washers M3   ( X 100)

• Lock Nuts M3   ( X 100)

• Screws

• M3 x 5mm Hexa   ( X 8) (MotorMount)

• M3 x 10mm Hexa ( X 8) (MotorMount)

• M3 x 12mm Hexa ( X 4) (Direction)

• M3 x 14mm Hexa ( X 3) (Direction)

• M3 x 16mm Hexa ( X 1) (Direction)

• M3 x 20mm Hexa ( X 60) (ALL THE REST)

• M3 x 35mm Hexa ( X 2) (Direction)

• M3 x 40mm Hexa ( X 24) (ARMS)

- UPDATE 09/04/2024 : Old Part ( Servo_Support ) New Part ( Servo Support4268 )

TAGS :

# JLB CHEETAH

# Ender 3 compatible

# 3D Printed RC Car

# Ackermann Steering Compact System

# Full Metal transmission 

# Brushless Motor 2850 up to 4268  (3650 recommended) (soon 4985 and 5687 $$$)

# 3S #4S # 6S 

# DUAL3S => 6S  /  DUAL4S => 8S  /  DUAL6S => 12S (soon DUAL8S => 16S $$$)

# ESP Front Gyroscope

# Pinion and Gearing 0.8 Module (32 Diametral Pitch) # No cogging issues

# Metal Differential mechanism Central axis Central drive shaft Motor-Gear

# Printed Beadlock Rims 2.2p or 3.2p #No Balooning  issues for 3.2p

# Strong modulable design easy replace

# Standarts pieces

# 4 Arms = 1 Arm (Lowers and Uppers)

# 4WD #2WD #4x4 #2x4

# With or Without Anti roll Bar

# 1:8 Hardware

# No Glue Only M3 Screws Washers and LockNuts

# LED Light System Front and Rear

# Drift

# GoPro Mount