UP Mini Extruder Platform

Prints (0)

Description

Summary Good fit. You will need a 3x.5 mm tap and a #40 (.098) drill to size the holes that need tapping. Be careful installing the wood screws. You may need to widen the wood screw holes slightly so they don't crack the ABS. Wood screws hold the wind barrier and the circuit board in place. Instructions Good fit. You will need a 3x.5 mm tap and a #40 (.098) drill to size the holes that need tapping. Be careful installing the wood screws. You may need to widen the wood screw holes slightly so they don't crack the ABS. Wood screws hold the wind barrier and the circuit board in place.

Design Files

File Size

extruder_platform.STL
574 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×