Spanish Guitar

Classical Spanish Guitar model for 3D printing.

Just hook-in your strings, tune, and go.

There are two varients, one with the words "Música Española", and the other without any writings.

3D PRINTING SETTINGS:

Material: PLA Nozzle size: 0.4 mm Line width: 0.4 mm Layer height: 0.25 mm Outer walls: 2 Infill: 5% Nozzle temp.: 210 c. Hot-Bed temp.: 60 c. Printing speed: 35 mm/s - 50 mm/s Build plate adhesion type: none Support: none

After printing, glue the neck to the soundboard and enjoy.