CONVEYOR BELTS SIMUFAB

Prints (0)

Description

3D MODEL DESCRIPTION

These are the Conveyor Belts from the SimuFab (Factory Simulation) collection, another 3DTROOP model that you can print on your standard 3D printer.

In order to be accessible, this collection is developed with off the shelf and low cost components, you can find easily on your favorite marketplace or electronic store.

They have a flexible and modular physical structure, allowing different configurations as well as the expansion of each element.

In addition, you can couple servo motors to create deviations simulating a real factory in your home to learn and train.

Comes with an assembly instructions manual.

You can use Arduino or a PLC of your choice to control it.

Features:

Minimum Module Legnth: 16 cm; Increment size: 8cm Usable width: 32mm; Motor drive 3~6Vdc with relay activation, allowing reversal; Reflective infrared optical sensors, with sensitivity adjustment; Sensors easily positioned as needed without the use of tools; Customized products for simulation: Tire and Beer Box; Micro servo motor actuator arm for product selection and belt change; Comercial bill of material:

-Actuators:

3~6Vdc Geared Motor with metallic gears for greater durability, Relay activation: https://pt.aliexpress.com/item/4000377305275.html?spm=a2g0o.order_list.0.0.b0a4caa4ffEWj1&gatewayAdapt=glo2bra

Micro servo 5V PWM: https://pt.aliexpress.com/item/1005003212293606.html?spm=a2g0o.productlist.0.0.3002b85c1pcu2Y&algo_pvid=05b595ff-40ca-4506-bd0d-a095e868ce97&algo_exp_id=05b595ff-40ca-4506-bd0d-a095e868ce97-2&pdp_ext_f=%7B%22sku_id%22%3A%2212000025484434878%22%7D&pdp_npi=2%40dis%21BRL%2140.18%2120.09%21%21%2118.75%21%21%40210318be16624005570643464e5ae5%2112000025484434878%21sea&curPageLogUid=xI3gCYVrluzk

-Sensors:

Optical Infrared Reflective Sensor 5Vdc: https://pt.aliexpress.com/item/32832150144.html?spm=a2g0o.order_list.0.0.b0a4caa4ffEWj1&gatewayAdapt=glo2bra

-Boards:

5v Relay Module: https://pt.aliexpress.com/item/1005002867727977.html?spm=a2g0o.productlist.0.0.9f942effCSqdZ7&algo_pvid=9ac19f9c-6cdd-4130-914a-0748ef27dd78&algo_exp_id=9ac19f9c-6cdd-4130-914a-0748ef27dd78-2&pdp_ext_f=%7B%22sku_id%22%3A%2212000022927395904%22%7D&pdp_npi=2%40dis%21BRL%2114.27%2110.69%21%21%2123.19%21%21%402101d64d16626684777531036e24d5%2112000022927395904%21sea&curPageLogUid=U1rMB8Ryiy0A

5v Optocoupler Module: https://pt.aliexpress.com/item/1005004394894192.html?spm=a2g0o.ppclist.product.2.4073usp2usp2c0&pdp_npi=2%40dis%21BRL%21R%24%2027%2C60%21R%24%2027%2C55%21%21%21%21%21%402101f6b116626686458965948e9ab3%2112000029026934830%21btf&_t=pvid%3A0fc161bb-8d50-4557-942b-67eb551a741f&afTraceInfo=1005004394894192__pc__pcBridgePPC__xxxxxx__1662668646&gatewayAdapt=glo2bra

You will also need M3x16 screws with washer and nut to secure the frame parts and M3.5x12 screws for plastic to secure the motors

No support required.

Please feel free to share the images of your print, that would be great!

Don't forget to hit like and follow us! Every week we will be posting new models for you!

3D PRINTING SETTINGS

Dimensions(mm): 160 x 42 x 45 mm Layer heigh: 0,2mm Walls: 2 Infill: 10% Material: PLA No support required. Printing time: ~7,5h

Design Files

File Size

Coupling 1.stl
178 KB
Connector.stl
57.1 KB
Rotor.stl
427 KB
Tire.stl
2.06 MB
Table.stl
72.3 KB
Stop 2.stl
34.2 KB
Stop 1.stl
34.2 KB
Servo Arm.stl
83.5 KB
Servant Cover.stl
54.8 KB
Sensor Cover.stl
401 KB
Protection.stl
481 KB
Motor Connector.stl
311 KB
Loading Ramp.stl
12.2 KB
Free Side 2.stl
303 KB
Free Side 1.stl
303 KB
Free Conector.stl
312 KB
Extra Side.stl
78.6 KB
Extender.stl
25.7 KB
Engine Side 2.stl
274 KB
Engine Side 1.stl
274 KB
Conveyor Belt Simufab 3DTROOP Assembling Instructions.docx
3.07 MB
CableRack.stl
252 KB
Beer Box.stl
17.7 MB
Base Adjustment 2.stl
67.5 KB
Base Adjustment 1.stl
67.5 KB
Adjustment Barrier 2.stl
64.2 KB
Adjustment Barrier 1.stl
64 KB
14x_Rug.stl
1.36 MB
10x_Rug.stl
995 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×