VR OCULUS QUEST HEAD POWER BANK HOLDER

Universal head power bank holder for the standard OCULUS QUEST2 strap or for other VR glasses with a similar strap system. Do you need to play VR for longer? This inexpensive practical solution is now available. Threading the tape from the VR through the holder and clamping electrical tape or whatever you have on hand to clamp the POWERBANK to the holder will only allow you to play for as long as the POWERBANK runs out. (I recommend a 2A charging output from a POWERBANK. The printed holder and the connection to the POWERBANCE do not interfere with playing. On the contact side with the head, ventilation holes are created against sweating. The shape of the holder is adapted to the back of the head "the holder has a radius in both horizontal and vertical directions". For better comfort, it is possible to stick a soft pad on the contact side of the holder. My experience is that even without it, it does not put pressure on the head thanks to the rounded shape, even when playing for a long time. Everything is visible in the attached pictures. I hope you are satisfied and I wish you a lot of fun.

3D PRINTING SETTINGS

Printing preferably from PET-G. Nozzle 0.4mm, perimeter 1, layer height 0.25mm, filling 100%, own forced supports