Joker Hookah / Shisha

Prints (0)

Description

Dear Hookah Friend,

i  was working on a Hookah since 3 years and get lots of different designs. This is my Joker hookah. You have to put a bullet like a glass sphere (7mm) in the base while printing. You can also testing a printed bullet if your printer is really accurately in printing round figures. I am using a stainless steel rod (14mm diameter) as a dip tupe. My rod goes through the hole joker pillar and ends in the water o the bowl. You can also try to use a printed dip tupe. At the top of the pillar there is a place to put a magnetic ring on for holding a metal plate. It is designed for a magnetic ring in the demension 27x21x3[mm].

The hole printing time is round about 30-35h. The bowl is printing with a  .8 nozzle (.25 layer height). The rest should be fine with a  .4 one. With this offer you will get 2 pillars as you can see on the photos. Next to the joker pillar you receive a "normal" spiral pillar. too. Both fits perfectly to the base which is locked by a bayonet mount.

If it's not capable for you to print waterproof bowls you can send me a message on my instagram account (CreateSmoke) for buying a printed hookah with a magnetic plate and black or white tupe.

Design Files

File Size

TupeAdapter.stl
734 KB
PlugForTheSiliconeSeal.stl
634 KB
JokerPillar.stl
2.54 MB
Bowl.stl
7.77 MB
Base.stl
5.47 MB
SpiralPillar.stl
73.5 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×