MTB Rear Mudguard The only one you will ever need!!!

Designed and tested in Australia's offroads.

-- Would fit most new and old MTB's Dual suspension or Hard-tails -- Fits 26'' to 29'' Wheels --

0.3 tolerance built in. Should print well on most printers.

Heavy duty rear mudguard designed to survive the harshest conditions.

Two strong pieces that connect through a heavy duty sliding joint.

No Glue needed!

Print and connect with; Standard 17 Zip Ties, Sizes; 4.6mm to 5mm width would fit perfect. 5 Zippies connect the two parts together and 12 more connect the Mudguard to the frame.

Happy Days :)

I printed this with Prusament PETG, If you can print with something stronger without warping than do that, the stronger (ASA etc...) the better, even though PETG works fine. Please have a look at the pictures to see how I placed the parts on the build plate, of course every printer is different so bare that in mind. Min Build plate size; 210/250/210(Prusa mk3s size) Recommended; 100% infill, Brim 15mm Min for Bottom part. 0.4 or 0.6mm Nozzle, 0.15 or .20 Layer Height, 4-6 Perimeters.

Happy printing!