Autonomous Hydrogen Fuel Cell Concept Car “Autonomus“

Easy-to-print car model kit in scale 1:43 for self assembly

FDM 3D-printable with standard settings

Attention! Steel axles with a diameter of 1 mm need to be ordered separately!

Print settings depends on your printer.

For this model TPU plastic was used for tires and PLA for all other parts

Recommended 0.4 mm nozzle 0.2 mm layer height 

Assembly notes:

Remove supports accurately

Drill all holes with 1 mm hand drill

Use 1.2 mm drill for axle holes in car body

Cut the axles in this length: 4x15 mm (side doors); 3x39 mm (roof doors); 2x38 mm (wheels); 2x5mm (front door).

Assembly all doors and parts together. Don't bend the axles!

Glue the windows and tank door on the car body