Howard DGA-5 "IKE" Version 2.2 - print test parts

Important note: It's only test parts! PLA: Canopy and a front part of the fuselage showing the nice external structure with its louvers and the practical internal structure with extra compartment for the battery. LW-PLA: Modified horizontal stabilizer design for weight reduction.

The print test parts include four STL files and two common Cura project files with all slicer settings. All important Cura slicer settings are also described in detail in the user guide linked below.

Version 2.2 of the Howard DGA-5 "IKE" allows to (optionally) insert a carbon fiber pipe into the wing as extra robustness margin for cutting flight maneuvers. Some parts of the landing gear are reinforced as well and slightly increased louver openings in the fuselage further improve the scale impression. Last but not least, the engine side pull was increased to improve the take-off behavior. All details can be found in the user guide (see link below).

The complete aircraft is available for download at https://www.rc3dmarket.com/3dprcfun

User guide: https://rc3dmarket.com/editor/editor-image/5/Howard-DGA-5-IKE-Version-2.2-User-Guide.pdf

Part changes from version 2.1 to version 2.2 (can be considered as additional printed test files): https://www.rc3dmarket.com/editor/editor-image/5/Changes-20220610-Version2.2.zip

Step-by-step video guide: https://youtu.be/y_rNPT2Pv-0

3D printed Howard DGA-5 in action: https://youtu.be/g-8eh7MfjDs https://youtu.be/Xv0kEhvdzHY https://youtu.be/4av5OILo4RU https://youtu.be/rBRUHhJTIQ4

RC groups thread: https://www.rcgroups.com/forums/showthread.php?3984475-Howard-DGA-5-IKE-a-racer-of-the-1930s