ESP32 CAM Camera Case 3 axes

ESP32 CAM Camera Case with 3 axes of rotation

Cura's parameter: 

- No support - Standard quality: outer body (corps_ext), bond (liaison), front panel (face avant) - Dynamic qualitiy (or better Super Quality): rear panel (face arrière), inner body (corps_int), foot (pied), basement (socle), screw M6 (boulon M6), screw M8 (boulon M8) M6 screw should be print twice

Mounting:  - Clip the ESP32-CAM card onto the inner part of the front panel by aligning the LED of the ESP32 card with the small hole which ensures visibility of the LED to the outside - Fit the outer body and the inner body, they must be able to perform a free rotation (do not stick) - Clip or glue the front face to the outer body - Glue the back side to the inner body - Screw the other parts with the screws

Firmware: You can use Tasmota's firmware (https://tasmota.github.io/docs/) to do quickly a camera  You can find a detaile tutorial here https://cgomesu.com/blog/Esp32...