Universal Webcam Cover

Prints (0)

Description

Universal Webcam Cover

Fits well from 5.5 mm to 11 mm display thickness.

The prototype is tested on Qidi Tech X-Plus printer with 0.4 mm nozzle.

Material: ABS (niceABS Light Grey);

Print Settings:

  • Extruder: 
    • Flow: 100%;
    • Retraction Distance: 1.5 mm;
    • Retraction Speed: 30 mm/s;
  • Layer:
    • Layer Height: 0.16 mm;
    • Line Width (Inner Wall, Outer Wall, Top, Bottom): 0.35 mm;
    • Line Width (Infill): 0.42 mm;
    • Initial Layer Line Width: 130%;
    • Wall Line Count: 3;
    • Top Layers: 5;
    • Bottom Layers: 4;
    • Top/Bottom Patterns: Lines;
    • Fill Gaps Between Walls: Everywhere;
  • Infill:
    • Infill Density: 90%;
    • Infill Pattern: Triangles;
    • Infill Overlap Percentage: 45%;
    • Infill Before Walls: Yes;
  • Additions:
    • Z Seam Alignment: Sharpest Corner;
    • Skin Overlap Percentage: 45%;
    • Combing Mode: Within Infill;
    • Build Plate Adhesion Type: Brim;
    • Brim Width: 8 mm;
  • Speed:
    • Infill Speed: 40 mm/s;
    • Wall Speed (Inner, Outer, Top, Bottom): 25 mm/s;
    • Initial Layer Speed: 25 mm/s;
    • Travel Speed: 80 mm/s;
    • Minimum Layer Time: 7 s;
  • Temperature:
    • Printing Temperature: 220 deg;
    • Build Plate Temperature: 100 deg;
  • Cooling:
    • Initial Fan Speed: 20%
    • Regular Fan Speed: 100%
    • Regular Fan Speed at Height: 0.62 mm;
  • Support: disabled.

Design Files

File Size

Camera_Cover_v2.STL
38 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×