Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
3D Topographic Tracks
Mount Panorama, Bathurst - 3D Topographic Track
Collect and print all of our miniature racetracks from around the world. All tracks are suitable on most standard sized 3D printers without the need to scale down.
Paint them, add static grass and trees etc to make a realistic looking miniature track...or keep them as they are!
Although we recommend printing these tracks on FDM printers, these models can be printed on a Resin 3D printer. You will need to adjust the model accordingly in your slicer software, as well as consider hollowing the part to reduce resin consumption.
Recommended Print Settings
These settings are tested and printed with Cura V4.8 and Creality Ender 3.
1.75mm PLA filament
200 degrees C Extruder Temp
50-60 degrees C Bed Temp
Scale : 100%
8-11hrs print time (depending on your bed adhesion settings)
Raft ( if desired) 8mm margin
Infill : 20-30%
Layer height : 0.2mm
perimeters : 2
Speed : 50mm/s
Comments