MASK AGAINST COVID 19 Flexible

MASK PROTECTION AGAINST THE COVID 19 FULLY PRINTED, WHICH HAS THE FOLLOWING ADVANTAGES:

-MAKE A PERFECT SEAL ADAPTING TO THE FACE, ENVITATING THE AIR IN.

-AVOID ODORS DUE TO SWEAT, AS IT IS EASY TO WASH AND THE MATERIAL DOES NOT ABSORB MOISTURE

-IT'S VERY ERGONOMIC, AS IT FITS THE FACE AND YOU CAN USE IT ON YOUR EARS OR NECK

-IT HAS TWO THREADED AIR IN INPUTS, IN WHICH FILTERS MADE OF FACE CLEANING CLOTHS ARE HOUSED, WHICH ARE INTERCHANGEABLE FOR GREATER PRACTICALITY AND CLEANING.

-IT HAS A DEFORMABLE NOSE CLIP IN HOT WATER (80 C), MADE IN PLA, WHICH ACHIEVES AN IDEAL ADAPTATION, TO AVOID FOGGING IN THE GLASSES.

-EASY TO ELABORATE

-IF YOU LIKE MY WORK, I APPRECIATE YOUR SUPPORT =)

3D PRINT PARAMETERS

PART: FILTER MASK APPROXIMATE WEIGHT: 17 Grams INFORMATION: PRINTING PARAMETERS PROPOSED MATERIAL: TPU SUGGESTED TEMPERATURE: 217 ° NOZZLE / 60 ° BED SUGGESTED SPEED: 20 mm / s LAYER / NOZZLE: 0.2-0.25 / 0.4-0.5 FAN: 100% HORIZONTAL EXPANSION: -0.1 SUPPORTS: NOT APPLICABLE FILLING: 10% + NO IRONING PERIMETERS: 5 ADDITIONAL REMARKS: THE FLAT PIECE IS PRINTED TO LATER BE FASTENED.

PART: CAP FILTER APPROXIMATE WEIGHT: 4 Grams INFORMATION: PRINTING PARAMETERS PROPOSED MATERIAL: PLA SUGGESTED TEMPERATURE: 217 ° NOZZLE / 60 ° BED SUGGESTED SPEED: 20 mm / s LAYER / NOZZLE: 0.2 / 0.4 FAN: 100% HORIZONTAL EXPANSION: -0.15 SUPPORTS: NOT APPLICABLE FILLING: 15% + NO IRONING PERIMETERS: 3 ADDITIONAL REMARKS: NONE

PART: NOSE CLIP ATTACHED PLAN APPROXIMATE WEIGHT: 2 Grams INFORMATION: PRINTING PARAMETERS PROPOSED MATERIAL: PLA SUGGESTED TEMPERATURE: 217 ° NOZZLE / 60 ° BED SUGGESTED SPEED: 20 mm / s LAYER / NOZZLE: 0.2-0.25 / 0.4-0.5 FAN: 100% HORIZONTAL EXPANSION: 0 SUPPORTS: NOT APPLICABLE FILLING: 15% + WITH IRONING PERIMETERS: 5 ADDITIONAL OBSERVATIONS: THE FLAT PIECE IS PRINTED TO LATER DEFORM WITH HOT WATER, AND ADAPT TO THE SHAPE OF THE NOSE.

PART: STRAP MASK ATTACHED PLAN APPROXIMATE WEIGHT: 3 Grams PENDING REFERENCE IMAGE STL INFORMATION: PRINTING PARAMETERS PROPOSED MATERIAL: TPU SUGGESTED TEMPERATURE: 217 ° NOZZLE / 60 ° BED SUGGESTED SPEED: 18 mm / s LAYER / NOZZLE: 0.2-0.25 / 0.4-0.5 FAN: 100% HORIZONTAL EXPANSION: 0 SUPPORTS: NOT APPLICABLE FILLING: 15% + IRONING PERIMETERS: 5 ADDITIONAL REMARKS: DOES NOT APPLY