PUPPENHAUS / DOLLHOUSE 1:14

Dollhouse - Model 1

55 single parts (some with plug connection)

For sufficient stability, it is recommended that the single components be glued together with a suitable plastic adhesive. The floor coverings can be printed separately and glued to the floor panels or printed as one component in conjunction with the respective floor panel. Depending on your color preference. Toothpicks or pins with a similar diameter can be used as the hinge for the doors. Prepared for electric light installation.

Outer dimensions: 1067mm x 294mm x 488mm (LxWxH)

German documentation including drawings are attached.

Click here to buy the CAD file: https://rh-creations.one/shop#!/stl-0x2f-cad-dateien/products/puppenhaus--0x2f--dollhouse--0x2f--1-0x3a-14--0x2f--modell-1--0x28-cad-dateien-0x29-

3D PRINTING SETTINGS

A printer with a minimum build area of 300x300x300mm XYZ is required

Recommended 3D printing parameters: 

Nozzle: 0,4mm / Infill: 30% / Support: yes / Raft: only for parts with a small support area

See the documentation for the detailed print parameters of each part.