Silencer over the barrel .22 / 5,5 mm

Prints (0)

Description

NEW SILENCER DESIGN FOR 2020! We are happy to present our new OVER THE BARREL silencer. Equipped with an expansion volume behind the muzzle, around the barrel, reduces the length sticking out from the muzzle making it more compact while keeping good noise dampening effects. This silencer design also has internal laminated reinforcements making the construction ideal for high powered PCP airguns and spring/gas piston airguns with heavy barrel vibrations. The internal laminated reinforcements can withstand a higher pressure and makes the design more resistant from outer impacts.

The inner hole / trajectory for the diabolo pellet is cone shaped that insures no impacts while maintaining highest tolerances minimizing “fly by” air and noise. THIS SILENCER FITS A 16 MM BARREL.

The OVER THE BARREL silencer is available in four different calibers:

.177” / 4,5 mm .22” / 5,5 mm .25” / 6,35 mm .30” / 7.62 mm

Fully functional, 1-piece strong and dependable construction with superior sound moderating characteristics and repeatable accuracy.

The 1/2 UNF thread is improved and is ready to be directly screwed on the barrel after 3D-printing – cleaning with plug tap is not necessary. Screw the silencer on and off five times and the threads are settled in and airtight. Do use recommended 3D-printer settings for this.

The surface of the silencer is smooth for easy spray-painting or attachment of lustreless “hockey tape” / black textile tape.

For best results when 3D-printning

  • Use a layer height of 0,1 – 0,15 mm.
  • Set the printerhead velocity to maximum 40 mm/sec, for decreased vibrations.
  • Suitable printing materials: PLA tough or regular PLA.
  • The silencer must be printed with the exit hole downwards and the threads up.
  • Do not use supports.
  • If your printer has build plate adhesion problems, use a brim.

Constructed in Sweden by experienced machine engineers.

Design Files

File Size

overthebarrel_cal_22_16mm.stl
65.5 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×