![View Kedlaw's profile Kedlaw's avatar](https://assets.pinshape.com/default/avatar-small.jpg)
Grumpy French Chef - 3D Printed by Kedlaw
![Grumpy French Chef 3D Print 2612 Grumpy French Chef 3D Print 2612](http://assets.pinshape.com/uploads/print_image/file/2612/container_20151017_203116.jpg)
![Grumpy French Chef 3D Print 2613 Grumpy French Chef 3D Print 2613](http://assets.pinshape.com/uploads/print_image/file/2613/container_20151017_202139.jpg)
![Grumpy French Chef 3D Print 2614 Grumpy French Chef 3D Print 2614](http://assets.pinshape.com/uploads/print_image/file/2614/container_20151017_200932.jpg)
950
Printer Used
My Rating
My Thoughts
Ok print as long as there is good adhesion and the print bad height is calibrated. For easy print add supports with 60 degrees overhang.
Settings
Print Time
7
hr(s)
Material Brand
Elefilament
Material Type
Pla
Layer Height
0.1
mm
Print Speed
30.0
mm/s
Extrusion Temperature
195.0
°C
Infill %
20.0
%
Supports
Yes
Comments