Low Poly Pokemon - 3D Printed by Robert van Zyl
1118
Printer Used
My Rating
My Thoughts
I wanted to use a vase mode like setting, but wanted more than one perimeter. To do this I simply made it 0% infill but kept 3 perimeters and 4 top and bottom layers. Really nice print that looks good, but uses very little filament!
Settings
Print Time
2
hr(s)
30
min(s)
Material Type
Blue PLA
Layer Height
0.3
mm
Print Speed
80.0
mm/s
Extrusion Temperature
220.0
°C
Infill %
0.0
%
Comments