Easy to print Front Loader Model Kit - 3D Printed by guaro3D
1334
Printer Used
My Rating
My Thoughts
Is a easy print, I would recommend raft for print in ABS. For asambly you will need some 1mm diameter bars, screws or wire, a bit of glue would good too.
Settings
Print Time
2
hr(s)
30
min(s)
Material Brand
Hatchbox
Material Type
ABS
Layer Height
0.15
mm
Print Speed
30.0
mm/s
Extrusion Temperature
235.0
°C
Infill %
15.0
%
Supports
Yes
Comments