Christmas Tree - 3D Printed by claver_claudia
842
Printer Used
My Rating
My Thoughts
First printed the original size. Second scaled to 0.8(smaller tree). Cut out the bottom for led tealight. Original size takes about two hours to print. Smaller about one hour (with above settings). Normal PLA for blue and transparant for red and white.
Settings
Print Time
2
hr(s)
3
min(s)
Material Brand
ground3d
Material Type
PLA
Layer Height
0.25
mm
Print Speed
15.0
mm/s
Extrusion Temperature
200-210
°C
Infill %
0.0
%
Comments