![View codie-warner's profile codie-warner's avatar](http://assets.pinshape.com/uploads/user/avatar/15776/small_9f797cbac941f37e867d75124b763f12.jpg)
Support Free Cactus - 3D Printed by codie-warner
1449
Printer Used
My Rating
My Thoughts
Used 20% infill as suggested by Bruno. First print toppled over mid print, so second one I printed with rafts as shown in pic. No supports needed otherwise
Settings
Print Time
1
hr(s)
23
min(s)
Material Brand
ColorFabb
Material Type
PLA
Layer Height
0.1
mm
Print Speed
50.0
mm/s
Extrusion Temperature
215.0
°C
Infill %
20.0
%
Supports
Yes
Comments