OpenR/C Formula 1 car - 3D Printed by Shaun Jackson

Horizontal thumbnail OpenR/C Formula 1 car 3D Print 3764

Horizontal thumbnail OpenR/C Formula 1 car 3D Print 3765

Like 58

1552

Printer Used

Kossel Pro

My Rating

My Thoughts

I printed this on my UtilBots K250VS using Matter Control. For the chassis I used 30% infill. And for the tires I used a 10% infill and 4 top and bottom layers.

Settings

Print Time

8 hr(s)

Material Brand

Hatchbox

Material Type

PLA

Layer Height

2.0 mm

Print Speed

200.0 mm/s

Extrusion Temperature

190.0 °C

Infill %

10.0 %

Supports

Yes

Comments

Chris Halliday:

Are those rubber tires Shaun Jackson? If so, the color match to the body is about bang on. Care to share filament brands for tires and body?

Reply9 years ago

Shaun Jackson:

Yes, they are rubber. The tire are printed with GP3D's flex filament, they only had blue in stock at the store. The body is Hatchbox Blue PLA .

Reply9 years ago

Chris Halliday:

Ahh...Thanks Shaun

Reply9 years ago

OpenR/C Formula 1 car - 3D Printed by Shaun Jackson

Print Time

Material Brand

Material Type

Layer Height

Print Speed

Extrusion Temperature

Infill %

Supports

Comments

Your browser is out-of-date!