![View Ethazeriel's profile Ethazeriel's avatar](http://assets.pinshape.com/uploads/user/avatar/40486/small_BTBeavers.png)
The T-Rex Skull - 3D Printed by Ethazeriel
![The T-Rex Skull 3D Print 3608 The T-Rex Skull 3D Print 3608](http://assets.pinshape.com/uploads/print_image/file/3608/container_IMG_20151130_123507.jpg)
![The T-Rex Skull 3D Print 3609 The T-Rex Skull 3D Print 3609](http://assets.pinshape.com/uploads/print_image/file/3609/container_IMG_20151130_002834.jpg)
![The T-Rex Skull 3D Print 3610 The T-Rex Skull 3D Print 3610](http://assets.pinshape.com/uploads/print_image/file/3610/container_IMG_20151130_123530.jpg)
![The T-Rex Skull 3D Print 3611 The T-Rex Skull 3D Print 3611](http://assets.pinshape.com/uploads/print_image/file/3611/container_IMG_20151130_123543.jpg)
![The T-Rex Skull 3D Print 3612 The T-Rex Skull 3D Print 3612](http://assets.pinshape.com/uploads/print_image/file/3612/container_IMG_20151130_124739.jpg)
1366
Printer Used
My Rating
My Thoughts
I scaled this down to 65% for printing, in the interests of not using all my filament. Bottom jaw was printed with supports (although I don't think it really needed them), and the skull itself was printed as is. Some minor Z-ribbing from my cheap threaded rods - good leadscrews will be my next upgrade - but otherwise this came out pretty well.
Settings
Print Time
6
hr(s)
30
min(s)
Material Brand
MadeSolid
Material Type
PET+
Layer Height
0.2
mm
Print Speed
45.0
mm/s
Extrusion Temperature
260.0
°C
Infill %
25.0
%
Comments