![Pin-Lock Keg Post Wrench 3D Print 371359 Pin-Lock Keg Post Wrench 3D Print 371359](http://assets.pinshape.com/uploads/image/file/371359/container_pin-lock-keg-post-wrench-3d-printing-371359.jpg)
![Pin-Lock Keg Post Wrench 3D Print 371360 Pin-Lock Keg Post Wrench 3D Print 371360](http://assets.pinshape.com/uploads/image/file/371360/container_pin-lock-keg-post-wrench-3d-printing-371360.jpg)
![Pin-Lock Keg Post Wrench 3D Print 371361 Pin-Lock Keg Post Wrench 3D Print 371361](http://assets.pinshape.com/uploads/image/file/371361/container_pin-lock-keg-post-wrench-3d-printing-371361.png)
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
This is a wrench for removing and tightening the posts on a pin-lock ('corny' or cornelius style) 5 gallon keg.
The posts normally require a 13/16" socket with either 2 (gas) or 3 (liquid) slots cut out for the pins. This fits both gas and liquid posts.
If you've purchased a used keg and need to remove the posts for the first time, you will need a metal socket on a ratchet with a long handle, since those kegs usually have blown o-rings and the posts have been way over tightened to compensate.
But otherwise, this will work well for removing and tightening posts on kegs with good o-rings. If you tighten your posts down hard enough to break this tool, you will destroy your o-rings. If your keg won't hold pressure without them being tightened that far, you already have!
Comments