Scotty and RAM 1" and 1.5" Ball Mounts

Prints (0)

Description

A colleague of mine got himself a new Chart Plotter/GPS/Fish-finder for his fishing boat. He as a number of Scotty Mounts so he asked me if I could design and print him a Scotty to RAM 1" Ball adaptor. 

Here is the result. A Scotty to RAM 1" Ball Mount. One has a solid ball and the other is open so a M8X80 can be inserted to reinforce it. I did want it to fail in heavy sea and have the RayMarine end up overboard!I also did a simple RAM 1" Ball mount.

Printed in PETG and design to print without support. I printed at .2 and .15. I used 4 Perimeters and 40% and 50% infill to give it strength.

The Scotty are design for a very thight fit adn no play. You may need to adjust print setting and/or X and Y scale to achieve desired fit.

Design Files

File Size

Scotty To Rm 1.5 Ball Solid.stl
4.04 MB
Scotty To Ram 1.5 Ball.stl
4.06 MB
Ram 1.5 Ball Falt Mount.stl
41.4 MB
ScottyToRam1inBall.stl
2.05 MB
ScottyToRam1inBallSolid.stl
2.02 MB
RAM 1" Ball Flat Mount.stl
1.54 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×