DIY WRC Magnetic Push-Pull Paddle Shifter for Rallysim

Inhanced body updated 2021.03.01

ABS / Infill 80%

https://youtu.be/eZHjsKRXdKc

If you have any problems with payment, please contact [email protected], or YouTube video comment.

*IMPORTANT NOTE

DO NOT tighten the two screws inserted into the body!

I desined for 320mm~330mm Steering Wheel.

Because it is designed to be tight for durability, You need sandpaper.

When the magnet is installed to collide, It improves control feelings.

Items Required:

Micro lever switch x2 125V 1A 3 Terminals Momentary 13mm Lever Arm Micro Switch Black KW10 https://www.ebay.com.au/itm/10...

Circular neodymium magnets x2   8x5mm  https://www.ebay.com.au/itm/N5...

M3 Cap socket screws 1x 35mm 1x 25mm 2x 12mm 4x 10mm

M3 Nut x8 

Wrapping Wires https://www.ebay.com.au/sch/i....

Zero Delay LED Arcade MAME Encoder USB To PC 5Pin Joystick PCB Board+Cables https://www.ebay.com.au/sch/i....

or you can use another many joystick pcb.

Instead of PCB, also use Arduino Pro Micro. https://www.ebay.com.au/sch/i....

https://www.arduino.cc/ https://www.zeroboy.eu/arduino... 

If you use Thrustmaster T300 or T500, use YipZone's Circular base https://www.thingiverse.com/th...

 This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. https://creativecommons.org/li...