Crow High Pose

PRODUCT DESCRIPTION

To build the crow you would require. 2x m3x25mm bolts  (bolt the wings on) 3x Hs311 servos  (neck and center wing control) 5x Hs65hb servos (Tail, beak, head rotate, each wing) You need some steel rod (1-2mm) to link the servos for the tail and wings. The neck is controlled using cables from two of the Hs311 servos. I used 1mm steel wire and Bowden cable. (Bike brake cable) To hook them up to the servo you can order these or engineer your own. You would require: 2x http://shpws.me/Ejec 2x http://shpws.me/H2Ao