mercury redstone MR3 freedom 7 alan shepard

Prints (0)

Description

redstone launcher for the first suborbital flight of the first American in space, alan shepard in May 1961. model at 1/60 th 64 pieces planned to be dismountable in 8 elements.

more information : https://the-amphioxus.monsite-...

print setting: The modeling was tested on an i3 with a 0.4mm nozzle. Imperative first layer at 0.3mm and must be even on the entire printing surface (desired autoleveling) layer height 0.2 mm for large pieces. 0.1 or 0.15 mm for small parts. No support needed. 15% filling if necessary. 0% on the thin walls. Brim imperative on the thin walls. Thickness of edges for thin pieces at 0.4mm (one nozzle passage) edge thickness for other parts at 0.8 or 1.2 mm

Design Files

File Size

40 rouge.stl
197 KB
37 rouge.stl
30.8 KB
34 rouge.stl
28 KB
30 noir.stl
62.6 KB
27 rouge.stl
25.7 KB
24 blanc.stl
56.5 KB
21 rouge.stl
60.6 KB
17 blanc.stl
63.7 KB
06 blanc x4.stl
1.06 KB
05 rouge x4.stl
12.4 KB
04 gris x4.stl
1.25 KB
03 blanc.stl
26.2 KB
02 noir.stl
24.2 KB
01 gris.stl
503 KB
07 noir x2.stl
9.65 KB
08 blanc x2.stl
9.65 KB
09 gris.stl
503 KB
10 gris.stl
491 KB
11 gris.stl
138 KB
12 gris.stl
283 KB
13 gris.stl
319 KB
14 gris.stl
66.6 KB
15 gris.stl
67 KB
16 gris x2.stl
28.1 KB
18 blanc.stl
228 KB
19 gris.stl
69.1 KB
20 gris.stl
62.5 KB
22 noir.stl
47 KB
23 noir.stl
47 KB
25 blanc.stl
154 KB
26 gris x2.stl
62.5 KB
28 noir.stl
47 KB
29 blanc.stl
39.1 KB
31 blanc.stl
15.1 KB
32 noir.stl
15.1 KB
33 gris.stl
923 KB
35 noir.stl
4.09 MB
36 rouge x3.stl
4.77 KB
38 rouge.stl
126 KB
39 rouge.stl
115 KB
41 rouge x2.stl
23.9 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×