Designed by
Miguel
Prints (1)
Description
RC body suitable for 1/10 scale car, like tt01 or hsp. The models are designed to be printed on any printer, almost parts without support, only the roof needs support material. It is designed to be assembled with screws and is ready to install 2 led 5 mm and two of 10 mm (xenon). If you want more realism you can install some rims like the ones shown
If you have any questions, do not hesitate to contact us.
Design Files
File Size
techo_free.stl
1.06 MB
estrivera_derecha_derecha_free.stl
462 KB
estrivera_derecha_free.stl
462 KB
lateral_derecho_trasero_free.stl
1.05 MB
frontal_inferior_free.stl
3.16 MB
frontal_superior_free.stl
7.37 MB
lateral_derecho_delantero_free.stl
905 KB
lateral_derecho_delantero_puerta_free.stl
713 KB
lateral_izquierdo_delantero_puerta_free.stl
724 KB
techo_columna_delantera_free.stl
378 KB
lateral_izquierdo_trasero_free.stl
1.02 MB
techo_columnas_centrales_free.stl
381 KB
maletero_superior_free.stl
1.12 MB
capo_free.stl
1.85 MB
columnas_techo_traseras_free.stl
762 KB
culo_inferior_free.stl
1.93 MB
culo_superior_free.stl
2.05 MB
delantero_ala_izquierda_free.stl
916 KB
Comments